dmx (25.Ağustos.2013),fatihim_84 (15.Eylül.2013),leogs05 (11.Kasım.2013),neagf (24.Ağustos.2013),ozgurozt (30.Ağustos.2013),serhend001 (25.Ağustos.2013),xtrem06 (22.Eylül.2013)
Sponsorlu Bağlantılar |
Developer : AndroidGX
Orginal Thread : http://forum.xda-developers.com/show....php?t=2517756
This is a pure STOCK WAY kernel with MINIMAL features.
My goal is to offer a slight modification of our Samsung stock kernel's, with few minimal living features, aiming a better battery life than stock (mainly thanks to the governor and various little tricks).
This is a kernel "plug-and-play" or I would say more "flash-and-play". No need for tools or apps to configure the kernel. This is the way I wanted it. A bit like speedmod kernel did.
Unfortunately, I'am not a developer but just a basic person with some android/linux knowledge already.
My dream was one day to create my own kernel, and thanks to great developers that answered my many questions, this dream has been possible. I'am very happy and proud to share my first ever kernel to everybody here.
It must be only flashed over an official Samsung ROM and not AOSP/AOKP !
Feel free to include my kernel to your ROMs but please don't forget to inform/ask first via PM and credit me in your original thread.
★ FEATURES ★ :
Main :
- Directly based on update1 XXUGMJA SEA JellyBean Android 4.3 (chinese) source from Samsung (for clean work and stability).
- Compiled with latest available Linaro GCC 4.7.4 (13.10 / 20131014) toolchain (with flags optimizations).
- Ramdisk from ZCUBMK2.
Main :
- ZZMoove (v0.7d) governor (added and set as default). Many profiles included, grab them below.
- ROW (v4) optimized and as only I/O scheduler.
- Wolfson Boeffla Sound (v1.6.4 drivers) compatibility.
- Touch-to-Wake (v1.1a) (enabled by default with 5 seconds delay).
- USB charging increased (to 900mA instead of 475 by default).
- Allow manual brightness to 300 candela.
- zRam added (but disabled by default) with LZ4 compression. Many profiles included, grab them below.
- init.d support.
- CRT-off effect support (early_suspend set to 100ms).
- ExFAT support (from official Samsung source).
- NTFS support.
- NFS support.
- CIFS support.
- xbox controller support.
- Triangle Away support.
Various tweaks :
- 4x zRam swaps capability (instead of single one).
- Dynamic FSync control (v1.2).
- Optimized ARM CPU topology.
- "ARCH_POWER" enabled.
- "SCHED_MC" added.
- "SCHED_MC_POWER_SAVINGS" set to agressive value (2) by default.
- "CONFIG_SCHED_AUTOGROUP" enabled.
- ROW scheduler & blk-core tweaks.
- AIO enabled (backport of Linux 3.6.x) and tweaked.
- Dynamic Screen Frequency Scaling capability (for ZZMoove governor).
- Intelli memory writeback (0 when screen ON & 500ms when screen off).
- Enabled persistent TRIM support for all partitions.
- "GENTLE_FAIR_SLEEPERS" disabled.
- Higher random entropy.
- Decreased touch boost frequency (from 800 to 600Mhz).
- ipv4: save CPU cycles from "check_leaf()" (backport from Linux 3.8).
- "cpu_load_slope" correctly set.
- Doubled min-max readahead.
- "Samsung Rooting Restriction Feature" removed.
- Fully compressed libs ".ko" modules.
- Automatic dalvik-cache wiping in kernel flashing procedure.
Network tweaks :
- "Westwood" TCP congestion module enabled and set as default.
- Enabled "bic" and "htcp" TCP congestion modules.
- Network speed tweak.
- Proportional Rate Reduction for TCP.
- bcmdhd : Disabled multicast on suspend.
Logging and debugging tweaks :
- Android logger disabled.
- Disabled various debug in defconfig.
- Disabled kernel debugging : Samsung / sec_log / last_kmsg / touchscreen / modem / max77686 / sec_watchdog.
★ SOURCES ★ :
AS ALWAYS, FLASH AT YOUR OWN RISK !
LATEST DOWNLOAD FILE
TÜM VERSİYONLAR :
https://www.dropbox.com/sh/ps7qohovu...able%20ZIP%27s
V 2.0.0 : http://www.mediafire.com/?owduprclu6gptqp
ZZMoove LCDFreq optimizations : http://d-h.st/sHk
Remove ZZMoove LCDFreq optimizations : http://d-h.st/khU
ZZMoove_Battery : http://d-h.st/bJ7
ZZMoove_BatteryExtremeYank : http://d-h.st/NCH
ZZMoove_BatteryYank : http://d-h.st/bH1
ZZMoove_Optimal : http://d-h.st/dSP
ZZMoove_Performance : http://d-h.st/N8R
ZZMoove_Profiles_Cleaner : http://d-h.st/hvR
Samsung Ultimate Kernel Script : http://d-h.st/22b
AndroGx Kernel Script ( Tüm profilleri kaldırır ) : https://www.dropbox.com/sh/hc3hpmn6x...ZSVCuX/Cleaner
Konu moonlight tarafından (02.Aralık.2013 Saat 23:58 ) değiştirilmiştir.
dmx (25.Ağustos.2013),fatihim_84 (15.Eylül.2013),leogs05 (11.Kasım.2013),neagf (24.Ağustos.2013),ozgurozt (30.Ağustos.2013),serhend001 (25.Ağustos.2013),xtrem06 (22.Eylül.2013)
Konu pendroz tarafından (14.Kasım.2013 Saat 16:13 ) değiştirilmiştir.
Herşey ingilizce.Acaba böyle mi kalacak yoksa çevirmeyi düşünüyor musunuz?
GT-I8150 cihazımdan Tapatalk 2 ile gönderildi
Stweaks desteklemiyor sanırım.
GT-I9300 cihazımdan Tapatalk 4 ile gönderildi
Stabil bir kernel fazla oyun vs oynamadığım için yüksek mhz leri deneme fırsatım olmadı ama cihazı gece 11 de %100 le bıraktım ertesi gün öğlen 12 de baktığımda %99 du demekki herşey yolunda güzel ayarlanmış extra batarya tüketmiyor ses kalitesi iyi Boeffla var zaten deneyebilirsiniz ben 2 gündür kullanıyorum...
Ek not : Bir sonraki pardus sürümünde default olarak bu kernel gelicek...
ozgurkocaman (11.Eylül.2013)
Cm 10.2 romlarda kullanabilirmiyiz acaba
Hocam bu kerneli yükledikten sonra ayarlama yapıyor musunuz şarj süresini arttırmak için?
Bir de konuyla alakasız olacak ama kusura bakma hocamtelefonun şarjı çok az bir kullanımda çok çabuk düşüyor. Kalibrasyon yapmak doğru bir şey mi yoksa önerebileceğiniz başka bir yol var mı? Şuan ultimarom 13 ve adam kernel yüklü.
Konu pendroz tarafından (24.Ağustos.2013 Saat 21:49 ) değiştirilmiştir.
yolcu02 (24.Ağustos.2013)